Thứ Hai, 20 tháng 4, 2015

Bản Chất Của Việc Lập Kế Hoạch(tt)

 Những vấn đề cốt yếu của quản lý
(Harold Koontz - Cyril Odonnell - Heinz Weihrich)
Bản Chất Của Việc Lập Kế Hoạch(tt)

Phối hợp các kế hoạch ngắn hạn và dài hạn
Tính linh hoạt trong xây dựng kế hoạch

·         Phối hợp các kế hoạch ngắn hạn và dài hạn
Thông thường các kế hoạch ngắn hạn được xây dựng mà không xét đến các kế hoạch dài hạn. Đó rõ ràng là một sai sót nghiêm trọng. Có thể không nên quá nhấn mạnh về tầm quan trọng của việc phối hợp hai loại kế hoạch này, nhưng kế hoạch ngắn hạn phải có vai trò đóng góp vào sự thành công của kế hoạch dài hạn tương ứng.
 Nhiều lãng phí nảy sinh từ các quyết định theo những tình huống trước mắt mà ta không thể đánh giá được ảnh hưởng của các quyết định này đối với các mục tiêu dài hạn hơn.

Đôi khi các quyết định ngắn hạn đã không đóng góp cho kế hoạch dài hạn mà trên thực tế có thể làm trở ngại, và còn đòi hỏi những thay đổi trong kế hoạch dài hạn.

Những người lãnh đạo chủ chốt nên thường xuyên xem xét và sửa đổi các quyết định ngắn hạn xem chúng có phục vụ các chưong trình dài hạn không, và các quản lý cấp dưới nên được thông báo một cách thường xuyên về kế hoạch dài hạn, sao cho các quyết định của họ phù hợp với các mục tiêu dài hạn của tổ chức. Điều đó dễ dàng hơn nhiều so với việc sửa chữa những mâu thuẩn, đặc biệt là khi các cam kết ngắn hạn có xu thế dẫn tới những cam kết lâu dài hơn trên cùng một vấn đề.  
           
·         Tính linh hoạt trong xây dựng kế hoạch
Trong phần này, chúng ta hãy thử xem xét nguyên tắc cam kết trên cơ sở của mức độ linh hoạt trong xây dựng kế hoạch. Nếu các kế hoạch có thể thay đổi được, để đáp ứng các yêu cầu của tương lai, chưa biết hoặc không thể biết trước được.
Do những bất định trong tương lai và sai lầm có thể có ngay cả trong một phép dự toán thông thái nhất, cho nên tinh thần của việc lập kế hoạch là phải linh hoạt – để có được khả năng thay đổi phương hướng khi những sự kiện không lường trước buộc phải làm như vậy, mà không tốn kém quá dáng.

Xây dựng tính linh hoạt cho các kế hoạch: Nguyên tắc linh hoạt
Nếu có thể xây dựng các kế hoạch càng linh hoạt, thì sự đe dọa thiệt hại gây ra do các sự kiện chưa lường trước được sẽ càng ít; nhưng nên cân nhắc giữa chi phí cho sự linh hoạt với những sự rủi ro nằm trong việc đưa ra những cam kết tương lai.
Đối với nhiều nhà quản lý, tính linh hoạt là nguyên tắc quan trọng nhất khi xây dựng kế hoạch. Khả năng để thay đổi một kế hoạch không gây chi phí quá mức hoặc mâu thuẫn. Nhưng có một thực tế không thay đổi là muốn có tính linh hoạt có thể phải tốn chi phí, kế hoạch kém linh hoạt nhất dường như it tốn kém nhất, nếu các sự kiện về sau chứng tỏ rằng khả năng thay đổi là không cần thiết.

Nhược điểm của tinh linh hoạt: Tính linh hoạt chỉ có thể thực hiện được trong những phạm vi hạn chế

      Thứ nhất là, không phải bao giờ cũng có đủ thời gian xem xét một quyết định để đảm bảo tính đúng đắn của nó.
      Thứ hai là, việc tạo nên tính linh hoạt của các kế hoạch có thể là quá đắt, đến mức lợi ích của nó có thể không tương xứng với chi phí bỏ ra.
      Thứ ba là, hạn chế chủ yếu để tạo ra tính linh hoạt của kế hoạch là có nhiều trường hợp tính linh hoạt hoàn toàn không thể đưa được vào kế hoạch hoặc chỉ có thể đưa vào với những khó khăn lớn đến mức không thể thực hiện được.

Ngày nay, các nhà quản lý trở nên rất tinh tế trong việc lập kế hoạch. Trước đây họ thường cảm thấy các kế hoạch ràng buộc họ vào những chương trình hành động cứng nhắc, còn bây giờ các nhà quản lý hiểu rằng họ quản lý kế hoạch chứ không phải bị kế hoạch quản lý.



(Some reference material to administration by Louistritung)    

Thứ Ba, 1 tháng 4, 2014

A Few of False Appearances From Some Stock In Hand(SMEs)



A Few of False Appearances From Some Stock In Hand(SMEs)

1.      Introducing

I have progressed on working and management researching for over 25 years. At that time, I was on approaching to various industries with a lot of capacity behavior such as: a leaders of administrative economic management, a chief accountant, a financial supervisor, a marketing and supply chains leader, a manager of sales, a deputy managing director, ect.

          By the time, I was gaining a few experiences from a lot of stage of checked up and realizing to a few things. One of them is a few of False Appearances From Some Stock In Hand.

 
That’s alluding to something in reality of worth in stock. This is a reason to think that the truthful value in stock is lower than value in a record book. During at that time I was revealing a few suppositional on that as follow:

 
-          A few name of material has become not precise value for a long time

-          Also, a few name of material has become some  scraps or wastes

-          A few name of low standard materials has put into store

-          Some of product not precise standards has done in store

-          Some missing product were returning by buyers

-          Some mistakes product has not resolved

Any circumstances are above-mentioned to existing for a longtime, it’s time I’m temporary calling them is a few of false appearances from stock in hand(Small and Medium-sized Enterprises).      

   

2.      Objective cause

 

What’s happen with six dashes in content of introducing.

-          Some inputs low standard material due to missing control, neglected to quality, low priced not equaled quality and suitable to produce.

-          Any Commission for some  parts of purchasing is due to this  problems.

-          Neglecting to oversee to quality system on production lines and insisted on checking to qualities on finishing product.

 

“Placing blame on workforces who are only responsible for 15% of mistakes where the system designed by management is responsible for 85% of (mistakes) the unintended consequences” (cited in the eight lesser categories of obstacles of Deming’s 14 points)

 

Explain the managerial significance of Deming’s 85-15 rule

  

3.      Some consequences of any objective causes to suffer.

 

I’m assuming that some objective causes will be suffering from some statements of finance if its  problems are  not resolve  for along time.

However, almost businessmen has ignored any signals by inventory statements of material and product in period of time .

 

And after 7 to 10 years, I’m supposing that some of financial statements will be able to seriously themselves.      

 

References of Sources:

 

-          Deming’s 85-15 rule.

-          Thirty-six cooperation and  industrial complex , six  companies of wooden processing – paper production, printed matter, ice production, tobacco production, handicraft production from 1985 to 2010.  

 

Issued by: Louis Nguyễn Trí Tùng

Thứ Ba, 7 tháng 1, 2014

HBR Guide to Better Business Writing

HBR Guide to Better Business Writing


Source: Harvard Business Press Books
240 pages. Publication Date: thg 1 29, 2013. Prod. #: 10946E-KND-ENG

One-Third of Professonals Write poorly

Don't Be One of Them

DON'T LET YOUR WRITING HOLD YOU BACK. 

Does writing for an audience of senior managers or key stakeholders get your heart pounding—in a bad way? Do you stare at your blank screen for several painful minutes, type in a few words, delete them, type a few more, delete again, and then go refill your coffee? Do your reports meander and raise more questions than they answer? When you send e-mails to colleagues, do your messages disappear into a void, never to be read, or acted on?

Many of us fumble for the right words and tone when we write, even if we're confident and articulate when we speak. But it doesn't have to be that way. Good business writing is a skill you must cultivate to succeed: you'll lose time, money, and influence if your e-mails, proposals, and other important documents fail to win people over.
The HBR Guide to Better Business Writing, by writing expert Bryan A. Garner, gives you the tools you need to express your ideas clearly and persuasively so clients, colleagues, stakeholders, and partners will get behind them.
This guide will help you:
Push past writer's block
Grab—and keep—readers' attention
Earn credibility with tough audiences
Organize your ideas
Trim the fat from your writing
Strike the right tone
Brush up on grammar, punctuation, and usage

Thứ Sáu, 27 tháng 12, 2013

Outline for an Organized and Managed of Factory

Outline for an Organized and Managed of Factory

(Issued by: Nguyễn Trí Tùng - Could be adjust for upon requested)

I.Administrative & human resources management of the factory

A.Organized Human Resources

1.Continually invest in human resources through cross-training (for mastery of multiple skills), education, job and career path rotation such as: beginning from level one to level seven depend on other industries

2.Training to group & team leader: including some group leaders, shift leaders, quality control leaders, improvement & development product leader , production line leader (such as: technical training, advanced training)

3.Planning to new managers in the future: including the shop foreman, production line leader, managers of QC, technical manager through in several short and long training courses (inside or outside factory, Vietnamese the chamber of commerce and industry)

4.The system of Salary scale

a)Set up the standard of salary scale based on some coefficient & level from state-owned of salary scale (applying for various industries) including some allowances

b)Seniority (the length of service): based on their length of service

5.Promotion regulation

a)The length of service’s standard

b)Contribution about expand the factory from theirs initiative (e.g. at five percent or above)

c)How percentage did they make to fulfill theirs tasks (e.g. at above seventy percent)

6.Labor union and labor law

a)Labor union: performing labor union in the out of the time working and reporting to the board of director periodically

b)Social insurance and heath insurance: obeying the labor law in force

7.

Commend & rewarding - discipline (this vote in from any good & excellent standards of factory from some workers) workers should be making to vote in every week, month, quarter for a-half year and yearly (e.g. level A= average, B= advanced, C= good). Performance of any selecting through discussion model workers regularly which one will be make theirs encouragement and will be making some motivated to theirs contribution from a lot of initiative and improvement on the production line of the factory.

B.Administrative Management of Factory

1.Managed to the working time and managed to go on a mission for the outside factory

a)Managed to the working time: any staffs and workplaces must be doing on time of their working time every day, in some case, they are late over five minutes, must be call them to warning (order), if they are late for three time, must be make a themselves-criticism in writing

b)Going on a mission for the outside factory: when any staff go on a mission or business for the outside factory must be permit of theirs high authorities in writing

2.Management of administrative to specialized assets, specialized equipments & tools: when they move from one place to another (outside of the factory) they must be permit of the senior for responsible in writing

3.Arranged to some working place for all division in the factory: they must be arrange some suitable for within theirs activities (such as: office division; administrative, human resources, accountant, statistics – warehouse division & coordinating the transport system, et cetera)

II.Organized to Accountant Division of Factory

A.Organized:

1.The chief accountant of factory responsible for reporting of a balance sheet to the chief accountant of company

2.Stores accounts responsible for in store & out store of raw materials, products, equipments & tools in writing

3.Warehouse-keeper responsible for quantities in store & out store of raw materials, products, equipments & tools in the warehouse of factory

BManaged:

1.Managed to all of assets, equipments, tools, raw materials: they must put theirs specification, actual value and time-limit of use in card.

2.Allocated and keeping track of any expenses, raw material norm from the planning was approved of high authority

3.Keeping track all of cost price of product and post it in the accounts book

III. Production and Operations Management

A.Organized:

Including planning & statistic section and operational section, quality control section such as: leader of planning & statistic section, manager of shop-floor or workshop for every product, the chief of production line (every step), team leaders for the different steps in the manufacturing process

B.Operation:

Checking all products is making before acceptance to in store (according to approval measured standard) every section is function as follow:

1.Planning & Statistic Section:

a)Setting up a production plan based on some place differ orders and predetermined order (of annual, a quarter & every month)

b)Production schedule is including: determined how many kind of material will be manufacture (involved; particularly, quality, quantity & timely) - Materials Requirements Planning (MRP)

c)Making to all of order note of raw material, fuel, equipment & tool to make any produce

d)Reporting all of raw materials of use after production

·Any leftover or shortage and some quantity of damaged

·In case: they must be point out any main cause from them

e)Comparing between raw material standard with raw material was use in reality (putting forward some ideas to improve the style of work)

f)Performing to time-keeping of workers

·Administrative & direct production management (such as: output-link salary)

g)Providing these figure for any section concerned with them

2.Action Plans:

·Performance of production in compliance the order note from planning & statistic section

·Carry out the action plan from them

·Capacity Requirements Planning (CRP)

·Moderation in Production (Gantt Chart – Johnson method)

IV.Technical and Quality Control Division

A.Technical:

Technical group must be ensuring all of machineries, production lines & specialized equipments in good condition. Carry out some maintenance & improved planning. Controlling all of production lines fifteen minutes before working time go on

B.Quality control:

Quality control group must be performed a verifiable regularly to control product quality – I suggest to apply ISO 9001:2008 Implementation

V.Research and development division


Solution for Small & Medium-sized Enterprises

Solution for Small & Medium-sized Enterprises (Suggested by Nguyễn Trí Tùng)


- How small & medium-sized enterprises to cope with high interest rate from lending – petrol prices & electricity increased – wages hike – depreciation dong/dollars – input materials prices increased. While the price not increases for product.
- Customers should be paying less or tightening their belt from expenditures habit of them
- How about solutions for them?
  • Situation
  1. The Bank loans was offering a high interest rate (at the presently, over 20 percent)
  2. Electricity price hikes
  3. Increasing petrol price
  4. Input material & wave raises
  5. SMEs lack of capital for production & business
  6. Can not raising price
  7. Cutting or stopped operating 's SMEs is feasible
  • Solution
  1. Reducing costs
  2. Saving material (reduced waste & reduced rework)
  3. Restrained damaged material (more efficiency use of material)
  4. Revising & being reasonable to human resources
  5. Improving & increased productivity
  6. Saving to expend electricity & fuel
  7. Organized all capitals resources (restructured resources)

Outline for an Organized and Executive of Enterprises

Outline for an Organized and Executive of Enterprises

I. Organized and Administrative Department

Article I. Organized human resources
Section 1.01 Recruiting& labor contract
Section 1.02 Training
Section 1.03 Human resources project
Section 1.04 Building to the system of scale salary
Section 1.05 Regulation to get promotions
Section 1.06 Labor law and labor union
Section 1.07 Social and health care insurance
Article II. Administrative management
Section 2.01 Intramural regulations
Section 2.02 Commend and reward – discipline
Section 2.03 Working time management
Section 2.04 Specialized equipment & property management

II. Financial and Accounting Department

Article I. Accounting management
Section 1.01
Article II. Financial analysis

III. Business and Research & Development Department

Article I. Business management
Article II. Research& development

IV. Planning and Production Department

Article I. Planning& statistic
Article II. Production management

V. Coordinating the Transport System Department

Article I. Coordinating the transport system
Article II. Loading and unloading management

VI. Miscellaneous division

ALTERNATIVE OUTLINE FOR A MARKETING PLAN Appendix

Appendix(referring to Business library )

1. Return on Investment (ROI): ratio of net profit (after taxes) to the investment used to make the net profit –multiplied by 100 to get rid of decimals
a. There are two ways to figure ROI
i. The direct way is:
ROI(in %) = Net profit (after taxes) x 100
Investment
ii. The indirect way is:
ROI(in %) = Net profit (after taxes) x Sales x 100
Sales Investment
This indirect way makes it clearer how to increase ROI. There are three ways:
- increase profit margin (with lower costs or higher price)
- increase sales
- decrease investment
(Profit margin: measures the average proportion of each dollar of revenue that ends up as profit)
2. Risk level: Suggested to refer three case
a. Risk profile: a plot showing how the value of the firm is affected by changes in prices or rates
b. Risk taking: bearing the uncertainties that are part of the marketing process
c. Risk-free rate: the required rate of return before risk is explicitly considered. It is composed of the real rate of return plus a rate equivalent to inflationary expectations.
3. Constraint: Anything that prevents a company from achieving higher performance in terms of sales.
4. Customer needs: suggested to refer some rating
a. Customer orientation: a management concept that encourages all managers and employees (including those in the factory) to be in tune with the wants and needs of customers. Leads to flexible product designs and production process
b. Customer service level: how rapidly and dependably a firm can deliver what customers want.
5. Competitor analysis: suggested to refer from something
a. Competitor analysis: an organized approach for evaluating the strengths and weaknesses of current or potential competitor’s marketing strategies
b. Competitive advantage: a firm has a marketing mix that the target market sees as better than a competitor’s mix – or – something unique or special that a firm does or possesses that provides an advantage over its competitors
c. Competitive barriers: the conditions that may make it difficult or even impossible, for a firm to compete in a market
d. Competitive bids: terms of sales offered by suppliers in response to the buyer’s purchase specifications
e. Competitive environment: the number and types of competitors the marketing manager must face, and how they may behave
f. Competitive parity method: a method of setting the advertising and promoting budget based on matching the absolute level of percentage of sales expenditures of the competition
g. Competitive advertising: advertising that tries to develop selective demand for a specific brand rather than a product category
6. Marketing information system (MIS): an organized way of continually gathering and analyzing data to provide marketing managers with information they need to make decision
7. Marketing management process: the process of
a. Planning marketing activities
b. Directing the implementation of the plans
c. Controlling the plans
8. Marketing mix: the controllable elements of a marketing program including product, price, promotion, and place– and – controllable variables that company put together to satisfy a target group
9. External search: the search process whereby consumers seek and acquire information from external sources such as advertising, other people, or public sources.
10. External analysis: the phase of promotional planning process that focuses on factors such bas the characteristics of an organization’s customers, market segment, positioning strategies, competitors and marketing environment.
11. Promotion:
a. communicating information between seller an potential buyer or others in the channel to influence attitudes and behavior
b. the coordination of all seller-initiated efforts to set up channels of information and persuasion to sell goods or services or to promote and idea
12. Promotional management: the process of coordinating the promotional mix elements
13. Promotional mix: the tools used to accomplish an organization’s communications objectives. The promotional mix includes:
a. Advertising
b. Direct marketing
c. Sales promotion
d. Publicity/public relation
e. Personal selling
14. Promotion plan: the framework for developing, implementing, and controlling the organization’s communications program
15. Promotion products marketing: the advertising or promotional medium or method that uses promotional products such as ad specialties, premiums, business gifted, awards, prizes or commemorative.
16. Promotional pull strategy: a strategy in which advertising and promotion efforts are targeted at the ultimate consumers to encourage them to purchase the manufacturer’s brand
17. Promotional push strategy: a strategy in which advertising and promotional efforts are targeted to the trade to attempt to get them to promote and sell product to the ultimate consumer
Compiler
Nguyen Tri Tung